Home About Writers Categories Recent Issues Subscribe Contact File Transfer





Scott Childs
Scott Childs owner of the Old Time Clock Shop at 1952 W. 13th is a native Wichitan. He completed 22 years of military service and has had over 30 years experience in clock repairs. Scott also teaches Advanced Clock Repair. He is a lifetime member and fellow of the National Association of Watch and Clock Collectors. You can reach Scott at (316) 267-1925.
Antiques & Collectibles
2003-11-01 08:49:00
How do I maintain my clock?
: I have a Howard Miller clock. How do you recommend that I clean and maintain my clock?
ANSWER: Just like having your automobile serviced every 5,000 miles, the modern mechanical clock needs regular maintenance to keep it working properly.  Howard Miller and all other major clock manufacturers (Sligh, Ridgeway, Bulova, & Hermle) recommend that mechanical movements be lubricated "serviced" every two years and be "cleaned" every 10-12 years.   At this point, we need to clarify the terms we are using.  In order to "clean" a clock, the clock movement is extracted from the case and totally  disassembled.  Each individual part is cleaned in a cleaning solution.  The clock is then rinsed twice, dried, and reassembled.  All the required points are lubricated and/or greased.  The clock is then returned to the case, and all the moving parts are adjusted.  The clock "service" is a bit different.  As before, the clock movement is removed from the case, but left together.  Most shops will go around each of the pivots (gear ends) with a piece of pegwood to remove as much gunk as possible.  The clock movement is then re-lubricated and put back in the case, making all the necessary adjustments. If you choose to maintain your clock yourself, keep these tips in mind.  First, use a lightweight oil or buy oil made specifically for clocks.  Don't over-lubricate your clock and never use WD-40.  Doing so may cause more harm than good.  Remember, a clock has pivots on both the front and back sides.  Just lubricating it from the back side is only getting half the job done. Following these guidelines and establishing a regular maintenance schedule for your clock will keep it ticking for years to come.
 
The Q & A Times Journal accepts no responsibility for unsolicited manuscripts or photographs.Materials will not be returned unless accompanied by a stamped, self-addressed envelope. Thank you.
 
Wildcard SSL Certificates