 | Patrick Goebel has been involved in the home improvement industry for over 10 years and is currently director of retail flooring of the Flooring & Decorating Division of Star Lumber & Supply Co., Inc. You may contact Patrick by email at pgoebel@starlumber.com or by phone at (316) 942-2221. |
Carpet, Tile & Floor Covering
2004-08-01 11:28:00
The carpet forum (continued)
ANSWER: (3rd part of series) One of the best things you can do is to know more about carpet and how it is made. Here are some terms and tips that can be helpful. MattingManufacturers' definitions of matting may vary. Matting is usually the result of untwisting of the yarn and intermingling of the yarn tips as a result of foot traffic. Matting may be caused by various factors, including improperly specified cushion, cushion failure, or improper maintenance. Matting is not considered a manufacturing defect unless specifically cited in the manufacturer's warranty.Moth and Beetle ControlMost wool and wool-blend carpet made in the United States is permanently treated to prevent moth damage. Carpet and rugs made of man-made (synthetic) fibers are naturally resistant to insects. Synthetic carpet fiber is not a food source, and is resistant to beetles, commonly called carpet beetles. However, beetles already in the home may lay eggs in the carpet pile and hatch in eight to fifteen days. For assistance in removing beetles or other insects, contact a professional pest control specialist. OdorDuring and immediately following the installation of your new carpet there may be a slight odor. The odor may result from the removal of your old carpet and cushion or from the new carpet, cushion, adhesives, or seaming tape. Ventilation with fresh air is recommended. Ideally, windows and doors should be opened, and the HVAC system should be operated at maximum capacity for 48 to 72 hours.Ripples and BucklesRipples and Buckles in carpet are most often caused by the failure to adequately stretch the carpet using a power stretcher, the use of an inappropriate or failed cushion, or excessive temperature and/or humidity. Ripples can be a combination of any of the above deficiencies. If ripples or buckles develop, consult your carpet retailer. Generally, the problem can be corrected by a qualified carpet installer restretching the carpet with a power stretcher. Roll CrushRoll crush usually occurs in areas of the pile yarn that have flattened because of the weight of the carpet roll. Areas of roll crush, or flattened pile yarn, are usually widthwise bands that may appear darker or lighter. Roll crush is not a manufacturing defect. Most roll crush occurs as a result of stacking a large number of rolls on top of one another. Roll crush may occur when carpet is stored at heights of three (3) or more rolls, or during shipping when rolls are loaded several rolls high.Rolls of carpet will sometimes exhibit some degree of roll crush immediately after the roll has been unwrapped. In most cases, this minor roll crush will disappear after the yarn has been allowed sufficient time to "blossom" as it adjusts to ambient conditions. All but the most stubborn crush marks in carpet with nylon pile yarn usually can be removed with steam or hot water extraction cleaning.More coming next issue.
