Home About Writers Categories Recent Issues Subscribe Contact File Transfer





Jason Jabara
Jason Jabara is the current manager at Jabara’s Carpet Galerie. After graduating from WSU, the family business became a large part of Jason’s adult life. His father Tom, mother Susan, brother Josh and his uncle George assisted in that endeavor to a large degree. Perhaps one of Jason’s greatest strengths is his hands-on approach. Jason can be reached by calling (316) 267-2585 or you may visit their website @ www.jabaras.com.
Carpet, Tile & Floor Covering
2012-04-19 09:04:20
Laminate vs. “engineered” construction
A: The main difference between laminate and engineered flooring is their basic construction. Engineered flooring is a wood option that has been around for quite some time and involves gluing multiple thin layers of wood together to ultimately provide the consumer a more stable, thinner option. The top layer, which is what you see, is the only “finished product” in the planking as the rest of the layers are products added not because of their aesthetics but instead because of how they strengthen the plank. The multiple layers of wood give the product dimensional stability and allow for it to be manufactured thinner which increases installation methods, location options, and to a lesser degree reduces cost. Contrary to popular belief, these floors can be sanded and refinished but it takes a craftsman with a very fine touch as the top layer can easily be sanded through. Laminate flooring is completely different. Some of today’s laminate floors look so much like wood that even industry professionals can be fooled but the similarity ends with the look as the construction and overall performance characteristics vary significantly. Laminate flooring is nothing more than a clear layer of protectant, over a picture which is laminated on a backerboard. Sometimes in the lamination process, the manufacturer will texture the product which gives it the grained look that most manufacturers have these days. Laminate is typically less expensive than real wood. Installation guidelines for these products differ slightly as well. You can install either laminate or engineered flooring over a wood subfloor, as well as solid ¾ wood flooring. Solid floors nail down, laminates click together at the seams and “float,” and engineered (depending on product line) can either be full-glued to floor, nailed, or in some cases floated. Concrete subfloors are much more limiting as to what can or can’t be installed on them. Although some manufacturers will approve it, I would not recommend any laminate, engineered, or solid wood flooring be installed on concrete below grade (basement). Concrete is always emitting moisture and the moisture levels most basements around here emit due to relatively shallow water tables is such that it can cause damage to these floors. Concrete floors on-grade or above however can be a suitable substrate for this type of flooring. For a floating application (either laminate or engineered), I would recommend a vapor barrier be installed first to block any moisture that might still migrate through the slab. If you are laying an engineered floor that is fully glued, there are glues out there that not only adhere the floor to the concrete but also act as a moisture barrier. Solid flooring obviously cannot be nailed to the concrete, but a secondary “stringer system” of wood can be installed on the slab to nail to. If you would like more details on this, you may want to contact a flooring professional.
 
The Q & A Times Journal accepts no responsibility for unsolicited manuscripts or photographs.Materials will not be returned unless accompanied by a stamped, self-addressed envelope. Thank you.
 
Wildcard SSL Certificates